Industrial robot, handling robot, transportation robot, optical fiber transmission manufacturing, and aluminum casting
Plus electric co., Ltd. TEL:053-437-7211 FAX:053-437-1137
E-mail:info@plus-ec.jp

TOP Company introduction Delivery results Technological introduction Specifications
Articulated Running Type Articulated Stationary Type Holizontal Articulated stationary Type Optical Multiple Terminal Board NC portable cutting machine

Company overview
Our company is involved from the development of a remote surveillance control and the educational practice device to the design production of FA・CIM of the factory including an automatic pouring robot and the optical, multiple transmission terminal stand that develops its company in the enterprise of the research and development type corresponding to users' needs over the wide range. When the product is divided roughly, the optical, multiple transmission terminal stand that applies the FA equipment for study similar to the design production of FA・CIM that combines cast protrusion breaking machine of an automatic Pouring robot related to the aluminum casting and the aluminum foil, the NC portable cutting machines, the handling robots, and these and the practical use machine and the photonic technology and the tropical fish robot for the practice teaching, etc. can be enumerated. In addition, skillful most of our company offers a lot of special automatic control systems by developing the remote watch controller that applies the control design and the information network of the FA・CIM system for the request of each engineering company and the producing company.
Access map       History

  Trade name Plus electric co., Ltd.
  Business establishment November, 1969
  Company establishment December, 1971
  Address 26 NEARAI-CHO NORTH-KU HAMAMATSU-CITY,SHIZUOKA-PREF,433-8108 JAPAN
  Director name
  Activities Industrial robot design production
Casting robot
aluminum casting   pouring robot
Special robot
FA system design production
remote surveillance control development
  Dealings bank The Shizuoka Bank, Ltd. Mikata is an original branch.
Hamamatsu credit union Mikata field branch

 【 acquisition qualification 】
Patent number: No.3121919
Content of patent: Automatic oiler and control techniques for casting that injects Toyu into two or more types
Automatic oiler and control techniques for casting that injects Toyu into two or more types


 【 access map 】
26 〒433-8108 Shizuoka Prefecture Hamamatsu City Kita Ward Neara towns
26 NEARAI-CHO NORTH-KU HAMAMATSU-CITY,SHIZUOKA-PREF,433-8108 JAPAN
TEL.053-437-7211   FAX.053-437-1137

It is 20 minutes in the car from Hamamatsu west IC.

 【 history 】
The history of the plus is a history of the technology and development.
Unlimited advancement is continued toward the age of tomorrow today.
1969~1979(1969-) 1980~1988(1980-)
1989~1993(1989-) 1993~1995(1993-)
1996~1997(1996-) 1998~2000(1998-)
2001~        (2001-)  

  November, 1969 Plus electric machine factory establishment in Hamamatsu City Sato-cho 1078.
Control board design production and sales of Warm air heater for agriculture.
  December, 1969 Plus electric machine factory establishment of Ltd. by the capital three million yen.
Design production of various labor saving machines and control boards.
  July, 1972 The new building construction and it moves to Hamamatsu City Mikata Haramachi 3263-7.
  December, 1973 The capital is increased to the capital five million yen.
  September,1974 Factory proliferation.
  July, 1975 It becomes Japanese ME society regular member.
  December, 1976 It becomes 26 Hamamatsu City Neara towns by the address display change.
  October, 1980 Development, manufacturing, and sales of the industrial-use robot begin.
  February, 1981 Doing spot welding robot and manufacturing sales of about development and 200.
  March, 1981 Office and one at factory extension and rebuilding.
  April, 1981 Robot engineering enterprise recognition.
  March, 1982 Aluminum pouring robot development.
  April, 1983 Shizuoka Prefecture development type corporate society member.
  October, 1983 Cleaning robot development.
  December, 1983 FA system development and handling robot development.
  August, 1984 Buff multiplication robot development.
  November, 1984 Revolute robot development.
  December, 1984 W injector control development.
  February, 1985 Robot system development by optical cable.
  February, 1985 Optical, multiple transmission terminal stand development.
  April, 1985 Large-scale pouring robot of scalar expression development.
  December, 1985 The capital is increased to the capital 10 million yen.
  March, 1986 FA system development for study.
  May, 1986 Running type robot development.
  July, 1987 Pressure capacity automatic weighing device development in aluminum can. It delivers it to the Mitsubishi material.
  March, 1988 Cashimerain measurement device and rotary line inspection device development.
  March, 1988 Automatic processing line development that uses FANUC robot.
  June, 1988 NC control automatic operation warehouse development.
  June, 1988 It delivers it to large-scale FA device development and Kawasaki municipal industrial high school in Kawasaki for study.
  June, 1988 Interlock board OEM continuance production for FANUC robot.
  February, 1989 Video projection device (VICS) is delivered to development and international NTT.
  April, 1989 It delivers it the engine test bench control for Toyoda Automatic Loom Works, Ltd..
  December, 1989 Nissan assembly line conveyer electrical equipment delivery.
  February, 1990 Stamp machine control continuance delivery for sea bass.
  April, 1990 Seat adjuster line delivery for Aisin Seiki Co., Ltd..
  May, 1990 AUTOMATIC CUTTER OF AL.WHEEL CAST INGATE for Enbishi Aluminum Wheels Ltd.
  September, 1990 Process of flange electrical equipment construction delivery for Konica.
  September, 1990 Stamp machine electrical equipment construction for Fuji Heavy Industries Ltd..
  January, 1991 The FANUC robot was used for precise SUZUKI and the sea bass part goods.
NC machine tool transportation device.
  March, 1991 Assembly line electrical equipment construction for Mazda.
  March, 1991 Part supply car electrical equipment for Konica.
  April, 1991 Buff multiplication robot control system. Fuji stringed instrument and others.
  August, 1991 Casting factory FA line for Enkei.
  October, 1991 Aluminum pouring robot export for Taiwan Hicayou industry.
  October, 1991 Delivery achievement of 100 aluminum pouring robots.
  November, 1991 Aluminum pouring robot export for USA day Makoto FLX.
  March, 1992 Aluminum pouring robot export for South Korea east and west machine worker.
  March, 1992 Disk precise measurement machine export for Taiwan.
  July, 1992 Aluminum pouring robot export for Taiwan Gen industry.
  August, 1992 Aluminum pouring robot export for USA day Makoto FLX.
  November, 1992 Aluminum pouring robot export for Taiwan Toolcayo machine.
  January, 1993 The headquarters factory move and the name of the company are changed into the plus electric machine Ltd. in the capital rice field technopolis.
  February, 1993 Multiple transmission terminal stand development.
  May, 1993 Machine tool automation line electrical equipment development.
  July, 1993 Control board development for Kansai airport.
  November, 1993 Furnace cover opening and shutting interlock development.
  December, 193 Conveyer line electrical equipment and skin plate welding robot development.
  January, 1994 Melting furnace control board and small part line device development.
  March, 1994 Direct current brake device development.
  May, 1994 Film processing, ED preprocessing, electrodeposition coating, device control board, wire rolling up device, water tank, Seki folding machine, and Seki fold device development.
  June, 1994 Tile target burial device electrical equipment development.
  July, 1994 Rubbing device development.
  September, 1994 Cancer Tori loader electrical equipment and voltage displacement measuring instrument development.
  January, 1995 Product warehouse conveyer system and Pierce R bend machine development of 16 points.
  February, 1995 Code cutting machine development of putt spring.
  March, 1995 Painting device electrical equipment development in pipe.
  May, 1995 Electrodeposition system drain receiving tank control board, update waste fluid receiving tank control board, Uwanoribus control board, automatic distortion Toki control board, conveyer line electrical equipment, and DSP mail inserter.
  June, 1995 Sizing press Deparetaizar electrical equipment.
  August, 1995 Small articles of PO preprocessing device, cylinder block final confirmation device, and rubbing and line of sticking together electrical equipment.
  September, 1995 Bearing press-fitting machine electrical equipment.
  November, 1995 Multiple electrical equipment device and flame detector control board production.
  December, 1995 Mechatronics module education equipment.
  March, 1996 Transportation conveyer electrical equipment, point of contact high frequency, and automatic welding device development for ceramic product Haco device and continuous furnace.
  April, 1996 Type temperature shot number management function and specimen material transportation line buffer electrical equipment development.
  May, 1996 Display device, various part conveyer transportation device electrical equipments, and warehouse stock conveyer transportation device electrical equipment developments for outdoor following type eight characters.
  June, 1996 Chaos control tropical fish robot and large-scale seal body processing machine electrical equipment development.
  July, 1996 Washing removing fat device control board production and sintering press goods and Paretaigegg device electrical equipment development
  September, 1996 Battery visual-inspection equipment electrical equipment development.
  October, 1996 Oil hole side Tocacou machine electrical equipment and presenting vote leader printer soft development.
Assembly production support system, North America transfer remodeling, rubbing device electrical equipment, LSI measurement business, thing, degree weighing device, and pickup/delivery station line conveyer control development.
  November, 1996 Middle child shell Bali Toyosoo Ocaihats.
  December, 1996 Picture cam reading system, software cam creation system, heater control for control of off-line heating and cooling, driving part synthesis control controllers, driving part synthesis control software, and injection molding machine, board electrical equipment, and DVD decoder LSI development.
  January, 1997 Oil hole penetration confirmation device electrical equipment and optical communication interactive experiment device development.
  March, 1997 Optical, multiple transmission terminal stand and breakdown report telephone communication software development.
  May, 1997 Chassis stamp machine electrical equipment.
  June, 1997 Finish bore processing machine electrical equipment, slight electric wave type, and wireless sending and receiving unit making for trial purposes.
  July, 1997 Transportation part liquid pulling out Sosoeki Tomonayosoo Odensou .
  August, 1997 Riyasasbolt tightening device.
  September, 1997 Bolt tightening for road Keyuki device, screen printer electrical equipment, and car assembly and device electrical equipment (nut runner) development.
  October, 1997 Transportation Robottoteeting.
  November, 1997 Kenagayuki breakdown tree software development, balance of weight of parts measurement, and processing device electrical equipment
  December, 1997 Machine electrical equipment only for holing open processing.
  January, 1998 Manhole management software development.
  February, 1998 Hot press device electrical equipment development.
  March, 1998 Oil pulling out Abra device electrical equipment and FANUC robot system remodeling.
  April, 1998 Plane taste laboratory grinding board controller production.
  May, 1998 Optical communication experiment module, optical cable practice device, and aluminum foil buff grinder electrical equipment development.
  June, 1998 One label Haki electrical equipment, clamping worktable electrical equipment, automatic punch cutting machine electrical equipment, and punch grinder electrical equipment development.
  July, 1998 Controller of washing in clear water development after electrodeposition of automatic machine parts fee supply device.
  October, 1998 Painting bumper refrigerator electrical equipment, Brakidasc measurement inspection device, and small special spindle unit electrical equipment development.
  December, 1998 Resin painting device electrical equipment.
  January, 1999 Piston supersonic wave washing machine electrical equipment development.
  February, 1999 Signboard of guide on road electrical equipment development.
  March, 1999 Pumping machine place software development, transportation line conveyer control, and plasma coding device control board production.
  April, 1999 Filling of amount of scale machine electrical equipment (citrus fruits) development.
  May, 1999 Design of device ..conveyer design (citrus fruits) with Baipratar and Codamanu..(citrus fruits)
  July, 1999 Chip mover electrical equipment.
  August, 1999 Casting line and manufacturing management system.
  September, 1999 Plating device in engine block cylinder.
  January, 2000 Drain machine place and operating soft remote watch/development.
  February, 2000 The glass substrate reversing device and control and others.
  July, 2000 The glass board piling match device and control and others. Windshield and press molding line control system for two wheels.
  August, 2000 Crank shaft automatic balance correction machine and control.
  September, 2000 Drain machine place. Regulating system. Aluminum foil casting equipment, image processing model distinction, automatic transportation device, and Yu cutting ..pushing.. machine.
  October, 2000 Reverse-radio and identification device of time.
  December, 2000 Camshaft Deparetaiz device and Dascbraki parts and swinging inspection weighing devices.
  January, 2001 Uoshartanc automatic operation processing machine control device production.
  January, 2001 High-speed responding electromagnetic valve driver design and production.
  February, 2001 Meat guide press-fitting machine control device production.
  March, 2001 The grip weighing device development for infant.
  April, 2001 Manhole drain machine place soft development.
  May, 2001 Super-Haganehag grinding control device production.
  May, 2001 Piston washing machine control device production.
  May, 2001 Liquid crystal manufacturing equipment electrical equipment.
  June, 2001 Earthquake prediction device production.
  June, 2001 Welding robot system electrical equipment.
  July, 2001 Press-fitting Paretaiz device production.
  July, 2001 AC servo rotor automatic operation assembly line design and production.
  July, 2001 PR4C-B。
  July, 2001 Drain machine place soft development.
  August, 2001 Large-scale pouring horizontal scalar robot production PR4C-S.
  September, 2001 Water heater water leak warning device development at midnight.
  October, 2001 Articulated Running Type pouring robot production PR4C-R for China.
  October, 2001 Articulated Running Type pouring robot production PR4C-R.
  October, 2001 Liquid crystal manufacturing device piling suiting machine electrical equipment.
  November, 2001 Welding robot system electrical equipment.
  December, 2001 Warm water shower unit production.
  December, 2001 Welding robot system electrical equipment.
  January, 2002 pouring robot PR4CL-B production.
  January, 2002 pouring robot PR4CL-B production for China.
  January, 2002 pouring robot PR4CLL-B production.
  February, 2002 Welding robot system electrical equipment.
  March, 2002 Welding robot system electrical equipment.
  March, 2002 pouring robot PR4CL-B.
  April, 2002 Welding robot system electrical equipment.
  May, 2002 pouring robot PR4CL-B for Thailand.
  May, 2002 Welding robot system electrical equipment.
  May, 2002 Grinder loader control device.
  June, 2002 Simple type Soso robot.
  July, 2002 Pocayoke device electrical equipment.
  July, 2002 Tolconcashandoringrobot system design and production.
  July, 2002 Mirindarhed pressure leakage machine electrical equipment.
  July, 2002 Welding robot system electrical equipment.
  August, 2002 Stamp machine control device.
  August, 2002 Welding robot system electrical equipment.
  September, 2002 Drain machine place soft development.
  September, 2002 Welding robot system electrical equipment.
  October, 2002 Unprocessed prevention device production.
  October, 2002 Engine NO stamp machine electrical equipment.
  November, 2002 Drain machine place logistical support soft development.
  November, 2002 Welding robot system electrical equipment.
  November, 2002 Ring automatic operation supply device electrical equipment.
  December, 2002 Articulated Running Type of CASTING ROBOT PR5C-R.
  January, 2003 pouring robot PR5CL-R production for China.
  January, 2002 Logistical support of drain machine place.
  February, 2003 Engine No. stamp machine.
  February, 2003 Aluminum foil model distinction device.
  February, 2003 Logistical support of drain machine place.
  February, 2003 αMi rotor assembly and remodeling.
  March, 2003 Case handling system.
  April, 2003 Press-fitting machine remodeling.
  April, 2003 Articulated Running Type PR5C-R.
  May, 2003 pouring robot PR5CL-R.
  May, 2003 64N rod S/A robot machine press-fitting .
  July, 2003 Press-fitting machine and remodeling.
  August, 2003 Lot No. Stamp machine.
  August, 2003 High-speed plating device.
  September, 2003 Leake tester stamp machine.
  October, 2003 pouring robot PR4C-R.
  October, 2003 pouring robot PR5C-R.
  November, 2003 pouring robot PR4C-R.
  November, 2003 New line pressure leakage test machine.
  November, 2003 Film liquid crystal rubbing machine and electrical equipment.
  November, 2003 Machine only for inside and outside diameter, V ditch, and grinding.
  December, 2003 The final Leake tester.
  December, 2003 The middle Leake tester.
  January, 2004 Disk weighing device and control new part.
  January, 2004 Engine assembly instruction system.
  February, 2004 pouring robot PR4C-B.
  February, 2004 pouring robot PR4C-B.
  February, 2004 Presses fluid cutting machine work automatic operation transportation device.
  February, 2004 Aluminum foil model distinction device.
  February, 2004 NC Presses oil cutting machine for aluminum foil.
  February, 2004 pouring robot PR4CL-B.
  March, 2004 pouring robot PR4C-B.
  May, 2004 pouring robot PR5C-B.
  May, 2004 pouring robot PR4C-B.
  June, 2004 Engine production instruction system.
  June, 2004 pouring robot PR4C-B.
  July, 2004 pouring robot No.3.
  August, 2004 GDC foundry machine and control.
  August, 2004 pouring robot PR5C-B.
  September, 2004 Brake drum stamp machine and electrical equipment.
  September, 2004 Disk weighing device and new the 2nd in control part.
  September, 2004 Powder vs. painting line image processing robot.
  October, 2004 pouring robot PR5C-B.
  October, 2004 pouring robot PR4C-B.
  November, 2004 Two wheels frame stamp machine.
  November, 2004 Possession pouring of two Radol Robo for turntable.
  November, 2004 The final pressure leakage inspection machine.
  November, 2004 The middle pressure leakage inspection machine.
  November, 2004 pouring robot PR4CLL-B.
  December, 2004 B/D stamp machine.
  December, 2004 Scatter machine US and cleaner electric machine assembly.
  December, 2004 pouring robot PR5C-B.
  December, 2004 The final pressure leakage inspection.
  December, 2004 The middle pressure leakage inspection.
  December, 2004 Press-fitting guide in valve seat machine.
  January, 2005 This bonding machine electrical equipment construction.
  February, 2005 pouring robot PR4CLL-B.
  February, 2005 Presses fluidcutting cutting aluminum foil NC machine.
  February, 2005 Work automatic operation transportation device(The image processor contains it. ).
  March, 2005 pouring robot PR4CL-B.
  March, 2005 pouring robot No.6.
  April, 2005 Rubbing device and installation of electric equipment.
  May, 2005 Cloth rolling machine.
  May, 2005 pouring robot PR5C-R.
  June, 2005 pouring robot PR5C-R.
  June, 2005 pouring robot PR4CLB.
  June, 2005 pouring robot PR5CLB.
  June, 2005 Press-fitting machine.
  June, 2005 Leake tester.
  July, 2005 pouring robot PR4C-LB.
  September, 2005 This bonding machine production construction.
  September, 2005 Film rubbing machine.
  October, 2005 Operation monitoring system.
  November, 2005 Deflection inspection device.
  November, 2005 pouring robot PR4CL-B.
  December, 2005 Articulated Running Type.
  January, 2006 Disk weighing device(linear gauge type).
  January, 2006 Change construction to pouring robot J3.
  February, 2006 Disk weighing device(laser type).
  February, 2006 Articulated Stationary Type PR4CL-B.
  February, 2006 Drain machine place driving support remodeling.
  February, 2006 pouring robot PR4C-B.
  March, 2006 Distribution outside CORE part assembly machine.
  April, 2006 Machine of screen construction it and electrical equipment.
  April, 2006 Two wheels frame measurement device.
  April, 2006 pouring robot PR4CLL-B.
  May, 2006 Two trim robot rotation table electrical equipment.
  July, 2006 Work automatic operation transportation device.
  July, 2006 The middle Leake tester.
  July, 2006 The final Leake tester stamp machine.
  July, 2006 pouring robot PR4CLL-B.
  August, 2006 Compressor conservation of energy automatic control device.
  September, 2006 pouring robot PR4C-B.
  October, 2006 Reverse-radio data Internet communication board computer.
  October, 2006 Highly accurate, laminate material inspection device.
  November, 2006 pouring robot PR4C-B.
  December, 2006 Disk weighing device gauge sensor type.
  Junuary, 2007 Motoring device for brim.
  February, 2007 Engine production instruction system remodeling.
top page.
 
TOP/ company introduction/ delivery results/ technology introduction/ specifications/ inquiry
Articulated Running Type/ Articulated Stationary Type/ Horizontal Articulated stationary Type/ Optical Multiple Terminal Board/ NC portable cutting machine
NC network
It registers in the NC network.
Robot FA system design, production, and sales
Plus electric co., Ltd.
Head office/26 NEARAI-CHO NORTH-KU HAMAMATSU-CITY,SHIZUOKA-PREF,433-8108 JAPAN
TEL:053-437-7211 FAX:053-437-1137